CentOS 7下配置Ruby语言开发环境的方法教程

 更新时间:2019-04-17 21:46:07   作者:佚名   我要评论(0)

本文跟大家分享的是在CentOS 7下配置Ruby语言开发环境的方法教程,分享出来供大家参考学习,下面来看看详细的介绍:
安装Ruby 2.2
CentOS7存储库中的Ruby版本

本文跟大家分享的是在CentOS 7下配置Ruby语言开发环境的方法教程,分享出来供大家参考学习,下面来看看详细的介绍:

安装Ruby 2.2

CentOS7存储库中的Ruby版本为2.0,但如果需要,可以使用RPM软件包安装2.2

1、添加CentOS SCLo软件集合存储库

[root@linuxprobe ~]# yum -y install centos-release-scl-rh centos-release-scl
# set [priority=10]
[root@linuxprobe ~]# sed -i -e "s/\]$/\]\npriority=10/g" /etc/yum.repos.d/CentOS-SCLo-scl.repo
[root@linuxprobe ~]# sed -i -e "s/\]$/\]\npriority=10/g" /etc/yum.repos.d/CentOS-SCLo-scl-rh.repo
# for another way, change to [enabled=0] and use it only when needed
[root@linuxprobe ~]# sed -i -e "s/enabled=1/enabled=0/g" /etc/yum.repos.d/CentOS-SCLo-scl.repo
[root@linuxprobe ~]# sed -i -e "s/enabled=1/enabled=0/g" /etc/yum.repos.d/CentOS-SCLo-scl-rh.repo
# if [enabled=0], input a command to use the repository
[root@linuxprobe ~]# yum --enablerepo=centos-sclo-rh install [Package]
[root@linuxprobe ~]# yum --enablerepo=centos-sclo-sclo install [Package]
# 安装ruby
yum --enablerepo=centos-sclo-rh -y install rh-ruby22

2、软件集合的软件包安装在/opt目录下, 要使用它,需要加载环境变量,如下所示:

# 加载环境变量
[root@linuxprobe ~]# scl enable rh-ruby22 bash
[root@linuxprobe ~]# ruby -v
ruby 2.2.2p95 (2015-04-13 revision 50295) [x86_64-linux]
[root@linuxprobe ~]# which ruby
/opt/rh/rh-ruby22/root/usr/bin/ruby

3、设置登录时自动启用Ruby 2.2,按如下所示进行配置:

[root@linuxprobe ~]# vim /etc/profile.d/rh-ruby22.sh
#!/bin/bash
source /opt/rh/rh-ruby22/enable
export X_SCLS="`scl enable rh-ruby22 'echo $X_SCLS'`"
export PATH=$PATH:/opt/rh/rh-ruby22/root/usr/local/bin

安装Ruby 2.3

# 安装ruby
yum --enablerepo=centos-sclo-rh -y install rh-ruby23

1、软件集合的软件包安装在/opt目录下, 要使用它,需要加载环境变量,如下所示:

# 加载环境变量
[root@linuxprobe ~]# scl enable rh-ruby23 bash
[root@linuxprobe ~]# ruby -v
ruby 2.2.2p95 (2015-04-13 revision 50295) [x86_64-linux]
[root@linuxprobe ~]# which ruby
/opt/rh/rh-ruby22/root/usr/bin/ruby

2、设置登录时自动启用Ruby 2.3,按如下所示进行配置:

[root@linuxprobe ~]# vim /etc/profile.d/rh-ruby23.sh
#!/bin/bash
source /opt/rh/rh-ruby23/enable
export X_SCLS="`scl enable rh-ruby23 'echo $X_SCLS'`"
export PATH=$PATH:/opt/rh/rh-ruby23/root/usr/local/bin

安装Ruby on Rails 4来构建Ruby Framework环境

1、添加EPEL软件存储库

[root@linuxprobe ~]# yum -y install epel-release
# set [priority=5]
[root@linuxprobe ~]# sed -i -e "s/\]$/\]\npriority=5/g" /etc/yum.repos.d/epel.repo
# for another way, change to [enabled=0] and use it only when needed
[root@linuxprobe ~]# sed -i -e "s/enabled=1/enabled=0/g" /etc/yum.repos.d/epel.repo
# if [enabled=0], input a command to use the repository
[root@linuxprobe ~]# yum --enablerepo=epel install [Package]

Ruby on Rails 4

1、安装Ruby 2.2,参考上面

2、安装依赖包(epel+SCLo)

[root@linuxprobe ~]# yum --enablerepo=epel,centos-sclo-rh -y install rh-ruby22-ruby-devel nodejs libuv gcc make libxml2 libxml2-devel mariadb-devel zlib-devel libxslt-devel

安装Rails 4

[root@linuxprobe ~]# gem install bundler
[root@linuxprobe ~]# gem install nokogiri -- --use-system-libraries
[root@linuxprobe ~]# gem install rails --version="~>4.0" --no-ri --no-rdoc
[root@linuxprobe ~]# /opt/rh/rh-ruby22/root/usr/local/bin/rails -v
Rails 4.2.8

Ruby on Rails 5

1、安装Ruby 2.3,参考上面

2、安装依赖包(epel+SCLo)

[root@linuxprobe ~]# yum --enablerepo=epel,centos-sclo-rh -y install rh-ruby23-ruby-devel nodejs libuv gcc make libxml2 libxml2-devel mariadb-devel zlib-devel libxslt-devel

安装Rails 5

[root@linuxprobe ~]# gem install bundler
[root@linuxprobe ~]# gem install nokogiri -- --use-system-libraries
[root@linuxprobe ~]# gem install rails --no-ri --no-rdoc
[root@linuxprobe ~]# rails -v
Rails 5.0.2

创建一个示例应用程序,并确保其正常工作

1、需要安装MariaDB服务

[root@linuxprobe ~]# yum -y install mariadb-server
[root@linuxprobe ~]# vi /etc/my.cnf
# add follows within [mysqld] section
[mysqld]
character-set-server=utf8
[root@linuxprobe ~]# systemctl start mariadb
[root@linuxprobe ~]# systemctl enable mariadb
ln -s '/usr/lib/systemd/system/mariadb.service' '/etc/systemd/system/multi-user.target.wants/mariadb.service'

2、初始化MariaDB

[root@linuxprobe ~]# mysql_secure_installation

NOTE: RUNNING ALL PARTS OF THIS SCRIPT IS RECOMMENDED FOR ALL MariaDB
  SERVERS IN PRODUCTION USE! PLEASE READ EACH STEP CAREFULLY!

In order to log into MariaDB to secure it, we'll need the current
password for the root user. If you've just installed MariaDB, and
you haven't set the root password yet, the password will be blank,
so you should just press enter here.

Enter current password for root (enter for none):
OK, successfully used password, moving on...

Setting the root password ensures that nobody can log into the MariaDB
root user without the proper authorisation.

# set root password
Set root password? [Y/n] y
New password:
Re-enter new password:
Password updated successfully!
Reloading privilege tables..
 ... Success!

By default, a MariaDB installation has an anonymous user, allowing anyone
to log into MariaDB without having to have a user account created for
them. This is intended only for testing, and to make the installation
go a bit smoother. You should remove them before moving into a
production environment.
# remove anonymous users
Remove anonymous users? [Y/n] y
 ... Success!

Normally, root should only be allowed to connect from 'localhost'. This
ensures that someone cannot guess at the root password from the network.

# disallow root login remotely
Disallow root login remotely? [Y/n] y
 ... Success!

By default, MariaDB comes with a database named 'test' that anyone can
access. This is also intended only for testing, and should be removed
before moving into a production environment.

# remove test database
Remove test database and access to it? [Y/n] y
 - Dropping test database...
 ... Success!
 - Removing privileges on test database...
 ... Success!

Reloading the privilege tables will ensure that all changes made so far
will take effect immediately.

# reload privilege tables
Reload privilege tables now? [Y/n] y
 ... Success!

Cleaning up...

All done! If you've completed all of the above steps, your MariaDB
installation should now be secure.

Thanks for using MariaDB!

# connect to MariaDB with root
[root@linuxprobe ~]# mysql -u root -p
Enter password:
Welcome to the MariaDB monitor. Commands end with ; or \g.
Your MariaDB connection id is 11
Server version: 5.5.52-MariaDB MariaDB Server

Copyright (c) 2000, 2016, Oracle, MariaDB Corporation Ab and others.

Type 'help;' or '\h' for help. Type '\c' to clear the current input statement.

# show user list
MariaDB [(none)]> select user,host,password from mysql.user;
+------+-----------+-------------------------------------------+
| user | host  | password         |
+------+-----------+-------------------------------------------+
| root | localhost | *E2ACEC2F2DA384EE6753673365DFEF35F0C272C9 |
| root | 127.0.0.1 | *E2ACEC2F2DA384EE6753673365DFEF35F0C272C9 |
| root | ::1  | *E2ACEC2F2DA384EE6753673365DFEF35F0C272C9 |
+------+-----------+-------------------------------------------+
3 rows in set (0.00 sec)

# show database list
MariaDB [(none)]> show databases;
+--------------------+
| Database   |
+--------------------+
| information_schema |
| mysql    |
| performance_schema |
+--------------------+
3 rows in set (0.00 sec)

MariaDB [(none)]> exit
Bye

3、创建测试应用程序

[root@linuxprobe ~]# gem install mysql2 --no-ri --no-rdoc -- --with-mysql-config=/usr/bin/mysql_config
[root@linuxprobe ~]# rails new SampleApp -d mysql
[root@linuxprobe ~]# cd SampleApp
[root@linuxprobe SampleApp]# vi config/database.yml
default: &default
 adapter: mysql2
 encoding: utf8
 pool: 5
 username: root
 password: password # MariaDB password
 socket: /var/lib/mysql/mysql.sock
# create test application
[root@dlp SampleApp]# rails db:create
Created database 'SampleApp_development'
Created database 'SampleApp_test'
[root@dlp SampleApp]# rails generate scaffold testapp name:string title:string body:text
[root@dlp SampleApp]# rails db:migrate
[root@dlp SampleApp]# rails server --binding=0.0.0.0
=> Booting Puma
=> Rails 5.0.2 application starting in development on http://0.0.0.0:3000
=> Run `rails server -h` for more startup options
Puma starting in single mode...
* Version 3.8.2 (ruby 2.3.1-p112), codename: Sassy Salamander
* Min threads: 5, max threads: 5
* Environment: development
* Listening on tcp://0.0.0.0:3000
Use Ctrl-C to stop 

4、客户端访问http://10.1.1.53:3000/

总结

以上就是这篇文章的全部内容了,希望本文的内容对大家的学习或者工作能带来一定的帮助,如果有疑问大家可以留言交流,谢谢大家对脚本之家的支持。

您可能感兴趣的文章:

  • CentOS 6.3下编译安装Ruby 2.0笔记
  • CentOS中配置Ruby on Rails环境
  • CentOS7下搭建ruby on rails开发环境
  • Ubuntu上配置Ruby on Rails框架及RubyMine IDE开发环境

相关文章

  • CentOS 7下配置Ruby语言开发环境的方法教程

    CentOS 7下配置Ruby语言开发环境的方法教程

    本文跟大家分享的是在CentOS 7下配置Ruby语言开发环境的方法教程,分享出来供大家参考学习,下面来看看详细的介绍: 安装Ruby 2.2 CentOS7存储库中的Ruby版本
    2019-04-17
  • Perl数组排序学习笔记

    Perl数组排序学习笔记

    本文我们学习如何用Perl对字符串或者数字数组进行排序。 Perl有个内置函数叫做sort毫无疑问的可以排序一个数组。 其最简单的形式是传递一个数组,它会返回排序
    2019-04-17
  • Perl初学笔记之Hello World

    Perl初学笔记之Hello World

    工作需要开始学Perl,下载个Window版(5.16)的: 下载链接 http://www.activestate.com/activeperl/downloads 安装好了之后,写第一个perl程序 复制代码
    2019-04-17
  • ruby ftp封装实例详解

    ruby ftp封装实例详解

    ruby ftp封装实例详解 最近自己用ruby 封装了一个Net::FTP的工具类. class FtpTool def initialize() @current_ftp = create_ftp end #
    2019-04-17
  • ruby中并发并行与全局锁详解

    ruby中并发并行与全局锁详解

    前言 本文主要给大家介绍了关于ruby并发并行和全局锁的相关内容,分享出来供大家参考学习,下面话不多说了,来一起看看详细的介绍吧。 并发和并行 在开发时
    2019-04-17
  • Perl图形化包管理工具PPM学习使用笔记

    Perl图形化包管理工具PPM学习使用笔记

    PPM(Programmer's Package Manager)是ActivePerl自带的一个图形化管理工具,有了这个工具,要升级,更新,移除Perl的Package都非常方便。只需要输入ppm 或者
    2019-04-17
  • Ruby 中的 module_function 和 extend self异同

    Ruby 中的 module_function 和 extend self异同

    在阅读开源的 Ruby 代码和编写可维护性的代码经常遇到这两者的使用,那么他们两者的共同点和区别是什么呢? module_function Ruby 的 module 是 method 和 co
    2019-04-17
  • Redis集群搭建全记录

    Redis集群搭建全记录

    Redis集群是一个提供在多个Redis节点间共享数据的程序集。   Redis集群中不支持处理多个keys的命令。   Redis集群通过分区来提供一定程度的可用性。在某个
    2019-04-17
  • 使用RVM实现控制切换Ruby/Rails版本

    使用RVM实现控制切换Ruby/Rails版本

    在学习Ruby on Rails的过程中,不同教程使用的Ruby和Rails版本不一样,为了保持和教程中使用的版本一致,我们可以用RVM(Ruby Version Manager)来控制当前的
    2019-04-17
  • mac及linux下搭建ruby+rails环境

    mac及linux下搭建ruby+rails环境

    mac通常会自带ruby一个版本的ruby环境, 比如我的是2.0.0。 如果项目需要的版本巧好和自己的默认版本一样,就不用折腾安装其他版本了。 如果不一样, 这里介
    2019-04-17

最新评论